Product classification

AK-Water jet turn up system

Applied to cultural paper, coated paper, packaging paper, board paper, specialty paper, toilet paper machines;
Eliminate wrinkles and fragments on the bottom paper of the roller during air blowing and roll changing;
Eliminate paper damage at the bottom of the roller caused by paper tape indentation due to paper tape rewinding
Can be used for directly winding after paper breakage, without the need for a new paper roll roller;
The success rate of roll replacement is over 99%, and there is very little paper loss at the bottom of the roll roller;
The paper yield is increased by 0.5% -3%, and the investment return is fast;
Fully automatic roll changing process, eliminating human unsafe factors;
The maximum operating speed is 10m/s;
Any specification of paper, the length of paper damaged during roll replacement is less than 50 meters.

产品描述

商品パラメータ

水针自动换卷系统

Outstanding Features

Applied to cultural paper, coated paper, packaging paper, board paper, special paper, and toilet paper machines.
Eliminates wrinkles and debris of paper sheets at the roller bottom caused by air-blowing reeling.
Eliminates paper loss at the roller bottom due to indentation from paper tape used in tape reeling.
Enables direct reeling after paper breakage without requiring a new reel.
Reeling success rate exceeds 99%, with minimal paper loss at the reel bottom.
Paper yield is increased by 0.5%–3%, ensuring quick return on investment.
Fully automatic reeling process eliminates human-induced safety hazards.
Maximum operating speed: 10 m/s.
For any paper type, the length of paper loss during reeling is less than 50 meters.

Photos of Water Jet Reeling

Working Principle (Normal Reeling)

After a pre-reeling signal is given, two water jet heads move to the middle; the high-pressure pump and glue pump are activated.
The high-pressure valves of the two water jet heads and the glue spraying valves are opened.
The two water jet heads start moving to cut the paper tip, which is adhered to the reel surface by the glue.
The glue spraying valves close, and the two water jet heads continue moving to both sides until reaching the paper edges.
Reeling is completed.